Class Schedule

GreenbeltTues | Thurs03/19/201904/18/20196pm - 10pm
GreenbeltSaturday04/06/201905/04/20198:30am - 5pm
AshburnMon - Fri04/08/201904/12/20198:30am - 5pm
GreenbeltMon - Fri04/08/201904/12/20198:30am - 5pm
GreenbeltMon - Fri05/06/201905/10/20198:30am - 5pm
AshburnMon - Fri06/03/201906/07/20198:30am - 5pm
GreenbeltMon - Fri06/03/201906/07/20198:30am - 5pm
GreenbeltMon - Fri07/08/201907/12/20198:30am - 5pm
AshburnMon - Fri07/08/201907/12/20198:30am - 5pm
GreenbeltMon - Fri08/05/201908/09/20198:30am - 5pm
AshburnMon - Fri08/05/201908/09/20198:30am - 5pm
GreenbeltMon - Fri09/09/201909/13/20198:30am - 5pm
AshburnMon - Fri09/09/201909/13/20198:30am - 5pm

Why Take CCNA Training?

Our Cisco CCNA course includes expert instructor-led training with live routers and switches. It provides students with the knowledge and skills needed to install, operate and troubleshoot a small to medium branch network.

Our training course includes Troubleshooting, LAN Switching Technologies, WAN Technologies and IP Services. Our course also includes the Operation of IP Data Networks, IP Addressing (IPv4 & IPv6), Network Security, Basic Troubleshooting and DHCP, NAT, ACLs and other IP Routing Technologies.

Suited to people looking for job roles such network engineer, network specialist or network administrator,  the CCNA course covers Cisco switches, routers, basic migration of security threats, introduction to wireless networking concepts. In addition, the course provides the necessary knowledge and skills required for the following protocols: IP, OSPF, ACLs (Ethernet and Access Control Lists), VLANs, Frame Relay, Serial Line Interface Protocol and EIGRP (Enhanced Interior Gateway Routing Protocol.

Topics Covered:

  • Troubleshooting VLAN connectivity
  • Understanding and verifying Cisco Licensing
  • Managing Cisco devices
  • Understanding and configuring clients for SNMP, Syslog and Netflow
  • Understanding and configuring OSPFv3
  • Multi-area OSPF IPv4 Implementation
  • Implementing EIGRP for IPv6
  • Troubleshooting EIGRP
  • Implementing EIGRP
  • Troubleshooting IPv4 Network Connectivity
  • Troubleshooting IPv6 Network Connectivity
  • Understand Spanning Tree Protocol
  • Understand and configure Etherchannel
  • Understand Layer 3 Redundancy Protocols


CCNA Routing and Switching is an entry-level course and has no prerequisites. Our-hands on training methodology will give you all you need to get started with Cisco systems.

Certification Requirements:

Required Exams 100-105 and 200-105 or 200-125

  • 200-125 Maximum of 70 questions
  • 100-105 Maximum of 55 questions 200-105 Maximum 65 Questions
  • Time Length 90 minutes per Exam
  • Format Multiple Choice, Drop and Drag, Fill in the Blank, Simulation, Testlet, and Simlet

Related Careers:

TrainACE's CCNA training will prepare you for job roles including:

  • Network Administrator
  • Network Engineer
  • Network Specialist

Free CCNA Fact Sheet

If your preparing to study for Cisco Certification, or are close to taking the exam, check out our new CCNA Fact Sheet. This is a concise guide to Access Control Lists, thier uses and commands:

Download CCNA Fact Sheet: Access Control Lists

Skills and Concepts:


Lesson 1: Basics of Networking

  • Topic A: Network Concepts
  • Topic B: The TCP/IP Model
  • Topic C: The OSI Model

Lesson 2: Basics of Cisco Devices and Commands

  • Topic A: Cisco Devices
  • Topic B: Infrastructure Components in Cisco Network
  • Topic C: Cisco Architecture Types
  • Topic D: Cabling Types
  • Topic E: Cisco IOS Commands

Lesson 3: Setting Up an IPv4 Network

  • Topic A: Basics of IPv4 Addressing
  • Topic B: VLSM
  • Topic C: Troubleshooting Methodologies
  • Topic D: Troubleshoot IPv4 Addressing and Subnetting Issues

Lesson 4: Setting Up an IPv6 Network

  • Topic A: Basics of IPv6 Addressing
  • Topic B: Troubleshoot IPv6 Addressing Issuesv

Lesson 5: Infrastructure Services

  • Topic A: Configure DNS
  • Topic B: Configure DHCP
  • Topic C: Configure NTP

Lesson 6: LAN Switching Basics

  • Topic A: Configure Switches
  • Topic B: Configure VLANs
  • Topic C: Interswitch Connectivity
  • Topic D: Layer 2 Protocols

Lesson 7: Routing Basics

  • Topic A: Routing Concepts
  • Topic B: Configure Routing Interfaces
  • Topic C: Inter-VLAN Routing
  • Topic D: Configure IPv4 and IPv6 Static Routing

Lesson 8: NAT Basics

  • Topic A: IPv4 Numbered and Named Access Lists
  • Topic B: Configure NAT

Lesson 9: Maintaining the Network Infrastructure

  • Topic A: Monitor Network Devices
  • Topic B: Configure Network Devices
  • Topic C: Manage Network Devices
  • Topic D: Device Maintenance

Lesson 10: Enhancing Network Security

  • Topic A: Configure Ports
  • Topic B: Secure Network Devices

Lesson 11: Troubleshooting Network

  • Topic A: Troubleshoot Infrastructure Services
  • Topic B: Troubleshoot Common Network Issues
  • Topic C: Troubleshoot Switching Issues
  • Topic D: Troubleshoot Routing Issues
  • Topic E: Troubleshoot Port Security Issues
  • Topic F: Troubleshoot Inter-VLAN Routing Issues
  • Topic G: Troubleshoot Basic Device Hardening Issues


Lesson 1: Managing VLANs on Cisco Switches

  • Topic A: Configure VLANs on Cisco Switches
  • Topic B: Configure Connectivity Between Cisco Switches
  • Topic C: Troubleshoot VLANs
  • Topic D: Troubleshoot Interswitch Connectivity

Lesson 2: Managing STP

  • Topic A: Basics of STP
  • Topic B: Configure STP
  • Topic C: Troubleshoot STP

Lesson 3: Managing EtherChannel

  • Topic A: Basics of Switch Stacks and VSS
  • Topic B: Configure EtherChannel
  • Topic C: Troubleshoot EtherChannel

Lesson 4: Mitigating Threats to the Access Layer

  • Topic A: Configure Access and Trunk Interfaces
  • Topic B: Configure IEEE 802.1x Port-Based Authentication
  • Topic C: Configure DHCP Snooping

Lesson 5: Configuring Infrastructure Services

  • Topic A: Configure HSRP
  • Topic B: Overview of Cloud Services
  • Topic C: Configure Traffic Filtering Using Access Lists
  • Topic D: Troubleshooting ACLs
  • Topic E: Configure VRRP

Lesson 6: Describing QoS Concepts

  • Topic A: Describe the QoS Concepts
  • Topic B: Describe the Congestion Management and Avoidance Techniques

Lesson 7: Infrastructure Maintenance

  • Topic A: Configure SNMP
  • Topic B: Troubleshoot Network Connectivity Issues Using ICMP Echo-based SLA
  • Topic C: Troubleshoot Problems Using Local SPAN
  • Topic D: Troubleshoot Basic Layer 3 End-to-End Connectivity Issues

Lesson 8: Managing Devices Using AAA

  • Topic A: Manage a Device Using AAA with TACACS+
  • Topic B: Manage a Device Using AAA with RADIUSv

Lesson 9: Network Programmability

  • Topic A: Network Programmability Basics

Lesson 10: WAN Technologies

  • Topic A: WAN Topology Basics
  • Topic B: WAN Access Connectivity Basics
  • Topic C: Configure PPP on WAN Interfaces Using Local Authentication
  • Topic D: Configure MLPPP on WAN Interfaces Using Local Authentication
  • Topic E: Configure PPPoE Client-Side Interfaces
  • Topic F: Configure GRE Tunnel Connectivity
  • Topic G: Describe Single-Homed Branch Connectivity

Lesson 11: Routing Technologies

  • Topic A: Routing Protocols
  • Topic B: Configure Inter-VLAN Routing
  • Topic C: Configure OSFPFv2 Routing for IPv4
  • Topic D: Configure OSFPFv3 Routing for IPv6
  • Topic E: Configure EIGRPv4
  • Topic F: Configure EIGRPv6v
  • Topic G: Troubleshoot Routing Protocols


Sold Out